[Healeys] Exhaust header stud fix ?

[David Nock]

Drill out and install a Helicoil   We do it all the time. 

David Nock

Sent from my iPhone

> On Feb 27, 2021, at 9:21 PM, WILLIAM B LAWRENCE via Healeys <healeys at autox.team.net> wrote:
> 
> 
> I doubt there is anything non-metallic that will stand up to the heat that close to the exhaust valves. Sounds like a job for a helicoil.
> 
> Bill Lawrence
> BN1 #554
> From: Healeys <healeys-bounces at autox.team.net> on behalf of Bob Spidell via Healeys <healeys at autox.team.net>
> Sent: Sunday, February 28, 2021 5:06 AM
> To: healeys at autox.team.net <healeys at autox.team.net>
> Subject: Re: [Healeys] Exhaust header stud fix ?
>  
> I used this stuff once to bolster the threads in a bellhousing slave 
> cylinder mount:
> 
> https://www.amazon.com/Loctite-442-28654-4-80ml-Thread-Stripped/dp/B000WSEUII/ref=asc_df_B000WSEUII/?tag=hyprod-20&linkCode=df0&hvadid=312106049007&hvpos=&hvnetw=g&hvrand=6889728303295400308&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=1014019&hvtargid=pla-440732566291&psc=1&tag=&ref=&adgrpid=62149806956&hvpone=&hvptwo=&hvadid=312106049007&hvpos=&hvnetw=g&hvrand=6889728303295400308&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=1014019&hvtargid=pla-440732566291
> 
> It held up for quite a few years, until I got a chance to put inserts 
> in; but, 300degF may not be enough for exhaust proximity. It's an epoxy, 
> like JB Weld, but it uses (your) bolt to form threads, and a 'release 
> agent' to keep the bolt/stud from being glued in. I can't say for sure, 
> but my gut feeling is an epoxy would gum up a tap.
> 
> Bob
> 
> On 2/27/2021 8:25 PM, Alan Seigrist via Healeys wrote:
> > All -
> >
> > One of the three holes at the bottom of my exhaust header is loose and 
> > the stud doesn't seat properly (but it does screw in).
> >
> > I was thinking of putting some "thermosteel" or JB "extreme heat" in 
> > there then tapping it out.
> >
> > The threads are still there and it just needs a bit of fill to tighten 
> > it up.
> >
> > Has anyone ever done a similar repair?  Will it last?
> >
> > Alan
> >
> 
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> 
> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
> 
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/ynotink@msn.com
> 
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> 
> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
> 
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/healeydoc@gmail.com
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20210228/4d4dc149/attachment.htm>