[Healeys] Renewing the clutch

[i erbs]

Make sure you have a 2x4 to support the back of the engine after pulling
the transmission out.

Ira Erbs
1959 AH 100-6
1967 MGB
Milwaukie, OR

On Sat, Feb 6, 2021, 11:26 AM Paul Leeks <paulleeks909 at gmail.com> wrote:

> Hi chaps
>
> The clutch on my 100/6 BN4 is starting to slip a bit. So, I am thinking of
> replacing it.
>
> The question is ... is it possible/practical to change it in situ (without
> removing the gearbox and the engine from the car)?
>
> ie: lift off transmission tunnel, undo and drop propshaft, disconnect
> gearbox from engine (no overdrive) and move it backwards on a jack, change
> clutch and put it all back together?
>
> As always, any advice very gratefully received.
>
> Many thanks
>
> Paul Leeks
> 100/6 BN4
> Lancashire, UK
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/eyera3000@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20210208/fc4a0ed5/attachment.htm>