[Healeys] rear axle nut

[Mark Fawcett]

Actually a 2 3/16" 12 point socket fit the rear axle 8 sided nut on my 1959
BT7. It's a bit tight but works. I later made a wrench similar to the one
Moss sells, but I never had the need to use it.

Mark Fawcett

On Thu, Aug 5, 2021 at 10:07 AM healeymanjim via Healeys <
healeys at autox.team.net> wrote:

> i was unable to use any sockets due to the nut having eight sides.
> finally bought the tool from moss that fits.
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/m.fawcett@cox.net
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20210805/77f83441/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_0405.jpg
Type: image/jpeg
Size: 86252 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20210805/77f83441/attachment.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_0407.jpg
Type: image/jpeg
Size: 78280 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20210805/77f83441/attachment-0001.jpg>