[Healeys] Tunnel cover nuts and bolts.

[Richard Kahn]

My cover is held in place with Phillips screws.
With the cover off, this is a good time to add the clutch bleeder extension so you can access it in the engine compartment.

Sent from my iPhone

On Aug 2, 2021, at 1:25 PM, simon.lachlan at alexarevel.plus.com wrote:


Dealing with my overdrive has led me to remove the tunnel cover on my car which is a MkII BT7 centre-shift.
The tunnel cover is held down by nuts that tighten down onto bolts which come up through the floor pan. A couple of mine are broken off and the rest are a pretty average dog’s breakfast. I haven’t looked underneath but I’d guess that the bolts are spot-welded to the floor pan from underneath???
Am I right?
And what size are these nuts and bolts?
Thanks,
Simon

_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/tahoehealey@hotmail.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20210802/b00dede7/attachment.htm>