[Healeys] BN2 carb float bowl

[David Porter]

Had a SU  carburetored Rolls Royce today with a vented elongated banjo bolt..

On April 30, 2021, at 12:13 PM, Michael Salter <michaelsalter at gmail.com> wrote:

Depends on the type of lid Bob.

There are some which use a washer with 3 reliefs which form the vent, some that have a banjo fitting with a vent tube and some that have a little brass flap under which the bowl vents.


M


On Fri, Apr 30, 2021 at 1:49 PM Bob Haskell <rchaskell at earthlink.net> wrote:


Between the float bowl lid and the nut

Bob Haskell
'60 AH3000 BT7 (big project)
'62 AH3000 BT7 (smaller project)
'64 Mini Cooper (small project - by definition)
'68 BMW 1600 (first car - project)
'80 MBG LE (running?)


-----Original Message-----
>From: Bob Haskell <rchaskell at earthlink.net>
>Sent: Apr 30, 2021 1:42 PM
>To: healey list <healeys at autox.team.net>
>Subject: BN2 carb float bowl
>
>Listers,
>
>Does the washer under the float bowl hold down nut seal?  Or is that a vent?
>
>
>Bob Haskell
>'60 AH3000 BT7 (big project)
>'62 AH3000 BT7 (smaller project)
>'64 Mini Cooper (small project - by definition)
>'68 BMW 1600 (first car - project)
>'80 MBG LE (running?)
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20210430/0081682f/attachment.htm>