[Healeys] BN2 carb float bowl

[Michael Salter]

Depends on the type of lid Bob.
There are some which use a washer with 3 reliefs which form the vent, some
that have a banjo fitting with a vent tube and some that have a little
brass flap under which the bowl vents.

M

On Fri, Apr 30, 2021 at 1:49 PM Bob Haskell <rchaskell at earthlink.net> wrote:

>
> Between the float bowl lid and the nut
>
> Bob Haskell
> '60 AH3000 BT7 (big project)
> '62 AH3000 BT7 (smaller project)
> '64 Mini Cooper (small project - by definition)
> '68 BMW 1600 (first car - project)
> '80 MBG LE (running?)
>
>
> -----Original Message-----
> >From: Bob Haskell <rchaskell at earthlink.net>
> >Sent: Apr 30, 2021 1:42 PM
> >To: healey list <healeys at autox.team.net>
> >Subject: BN2 carb float bowl
> >
> >Listers,
> >
> >Does the washer under the float bowl hold down nut seal?  Or is that a
> vent?
> >
> >
> >Bob Haskell
> >'60 AH3000 BT7 (big project)
> >'62 AH3000 BT7 (smaller project)
> >'64 Mini Cooper (small project - by definition)
> >'68 BMW 1600 (first car - project)
> >'80 MBG LE (running?)
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20210430/b9323cc9/attachment.htm>