[Healeys] BN2 Door Check

warthodson at aol.com warthodson at aol.com
Sat Apr 10 07:52:16 MDT 2021


I had a similar problem. I was able to gain assess to the inside of the front fender by removing the screws along the lower edge of the fender & along the hinge pillar. I was able to pull the bottom of the fender out just far enough to get my hand and arm thru the gap & up from under the car. The limit is how long your arm is & how wide the gap is. You will probably need a second person to start the door check mounting screws while you hold the check in place. If the door is already in place, be very careful to not open the door too far or it will hit the fender & damage the paint or even worse dent the the fender.Gary Hodson 


 
On Sat, Apr 10, 2021 at 1:58 AM Michael MacLean via Healeys <healeys at autox.team.net> wrote:

I might be whistling in the dark here, but is there a way to install the door check assembly in the "A" pillar without removing the fender?  Trying to avoid any damage after paint.Mike MacLean


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20210410/044a7c95/attachment.htm>


More information about the Healeys mailing list