[Healeys] Unidentified exhaust pipe

[Bob Spidell]

Looks more like a BJX pipe to me. The 100s' downpipe should run pretty 
much straight down from the manifold, else the clutch lever can hit the 
pipe when pressed to the floorboard (the one on my BN2 does; most 
annoying). Most/all aftermarket pipes cause this, and I'm told at least 
some of the OEM pipes did as well.

On 9/21/2020 8:59 AM, Michael Salter wrote:
> Looks like an aftermarket BN1/2 front pipe.
> From memory the flange should have 7/16" holes on a 1.5" PCD.
>
> M
>
> On Mon, Sep 21, 2020 at 11:15 AM Max Byers via Healeys 
> <healeys at autox.team.net <mailto:healeys at autox.team.net>> wrote:
>
>     Hello, Healeyphiles –
>
>     Can anyone identify the exhaust pipe in the attached photos? It
>     has two “Made in England” labels on it and the numbers SU-529 and
>     02.106.1 but I am unable to find a reference to those numbers. 
>     The pipe may be for some model of Healey (not BJ8) or not. It’s
>     painted and apparently unused, but it has surface rust where the
>     paint has flaked off. The pipe is intended to go INSIDE the
>     muffler stub pipe.
>
>     Thanks!
>
>     Steve Byers
>
>     HBJ8L/36666
>
>     BJ8 Registry
>
>     AHCA Delegate at Large
>
>     Havelock, NC  USA
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20200921/5971ec34/attachment.htm>