[Healeys] [Healeys) 100-4 Heat Shield with Headers

[Charles Schott]

David, 

Forgot to mention that I'm running the 1 3/4 carbs. You can see from the pictures the 4 bolt SU gaskets. 

Regards, 

Charlie 
----- Original Message -----

From: "David Nock BCS" <healeydoc at sbcglobal.net> 
To: "Charles Schott" <schottc at knology.net>, "Bob Spidell" <bspidell at comcast.net> 
Cc: healeys at autox.team.net 
Sent: Monday, September 14, 2020 10:05:54 AM 
Subject: Re: [Healeys] [Healeys) 100-4 Heat Shield with Headers 

Which carbs are you running the 100. We have a heat shield available for the 100M with the 1 3/4 carbs available. 
David Nock 
healeydoc at sbcglobal.net 
209 948 8767 
www.britishcarspecialists.com 

Help us have our Founder Norman Nock inducteed into the 
British Sportscar Hall of Fame, You can vote for your favorites 
by visiting the site at. 
www.britishsportscarhalloffame.org 
From: Charles Schott via Healeys 
Sent: Monday, September 14, 2020 6:44 AM 
To: Bob Spidell 
Cc: healeys at autox.team.net 
Subject: Re: [Healeys] [Healeys) 100-4 Heat Shield with Headers 
Bob, 
I did wrap the headers but I'm a belt and suspenders type of guy. Never intended it to be that much work, but once I started, I wasn't going to quit on it. I'm also going to install the triangular vents into the front wings which should help expel the heat. And I built a false floor on the driver's side to provide an air space that will act as an insulator. It gets hot in Florida. 
Regards, 
Charlie 
----- Original Message -----

From: "Bob Spidell via Healeys" <healeys at autox.team.net> 
To: healeys at autox.team.net 
Sent: Sunday, September 13, 2020 11:31:10 PM 
Subject: Re: [Healeys] [Healeys) 100-4 Heat Shield with Headers 
Well done, but I gotta ask, why not just wrap the headers? 


On 9/13/2020 8:42 PM, Ray Juncal via Healeys wrote: 



Wow, you had fun making that. Nice work. 
On Sunday, September 13, 2020, 3:38:08 PM PDT, Charles Schott via Healeys mailto:healeys at autox.team.net wrote: 
After one more modification, the fifth one, to eliminate interference with the vacuum hose fitting, I can continue with mounting the carbs. Some, including me, might say it's been over engineered. 
Regards, 
Charlie 




_______________________________________________ 
Support Team.Net http://www.team.net/donate.html 
Suggested annual donation $12.75 
Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive 
Healeys at autox.team.net 
http://autox.team.net/mailman/listinfo/healeys 
Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/schottc@knology.net 



_______________________________________________ 
Support Team.Net http://www.team.net/donate.html 
Suggested annual donation $12.75 

Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive 

Healeys at autox.team.net 
http://autox.team.net/mailman/listinfo/healeys 

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/healeydoc@gmail.com 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20200914/3b28c2fd/attachment.htm>