[Healeys] [Healeys) 100-4 Heat Shield with Headers

Charles Schott schottc at knology.net
Mon Sep 14 07:44:21 MDT 2020


Bob, 

I did wrap the headers but I'm a belt and suspenders type of guy. Never intended it to be that much work, but once I started, I wasn't going to quit on it. I'm also going to install the triangular vents into the front wings which should help expel the heat. And I built a false floor on the driver's side to provide an air space that will act as an insulator. It gets hot in Florida. 

Regards, 

Charlie 

----- Original Message -----

From: "Bob Spidell via Healeys" <healeys at autox.team.net> 
To: healeys at autox.team.net 
Sent: Sunday, September 13, 2020 11:31:10 PM 
Subject: Re: [Healeys] [Healeys) 100-4 Heat Shield with Headers 

Well done, but I gotta ask, why not just wrap the headers? 


On 9/13/2020 8:42 PM, Ray Juncal via Healeys wrote: 



Wow, you had fun making that. Nice work. 

On Sunday, September 13, 2020, 3:38:08 PM PDT, Charles Schott via Healeys <healeys at autox.team.net> wrote: 


After one more modification, the fifth one, to eliminate interference with the vacuum hose fitting, I can continue with mounting the carbs. Some, including me, might say it's been over engineered. 

Regards, 

Charlie 






_______________________________________________ 
Support Team.Net http://www.team.net/donate.html 
Suggested annual donation $12.75 

Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive 

Healeys at autox.team.net 
http://autox.team.net/mailman/listinfo/healeys 

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/schottc@knology.net 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20200914/49c4fb97/attachment.htm>


More information about the Healeys mailing list