[Healeys] Carb removal

Richard Kahn tahoehealey at hotmail.com
Mon Nov 30 20:35:18 MST 2020


I'm not sure you can remove only one carb. With the linkage and the length of the mounting studs you could bend or break something. Let us know if you are successful. And how did you get away with not doing anything for 30 years. You must have had it stored for 29 years.

________________________________
From: Healeys <healeys-bounces at autox.team.net> on behalf of Leonard Berkowitz <DrBerkowitz at hotmail.com>
Sent: Monday, November 30, 2020 1:39 PM
To: healeys at autox.team.net <healeys at autox.team.net>
Subject: [Healeys] Carb removal

It has been thirty years since the last time I needed to do anything major on my BJ7 so my memory is not quite clear.  Can I remove the rear carb independently from the front carb? I have already designed a tool to access the lower hold down bolts.  If I remember correctly, I may have rebuilt and installed the carburetors when I rebuilt the engine, so access was not much of a problem.

Thanks
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20201201/40e319db/attachment.htm>


More information about the Healeys mailing list