[Healeys] Carb removal

[Elton S]

I also have to remove my HS6's as a pair.
Elton

On Mon, Nov 30, 2020 at 5:41 PM Don Anglesey via Healeys <
healeys at autox.team.net> wrote:

> I always remove my HD6's as a pair.
> Don
>
> Get Outlook for Android <https://aka.ms/ghei36>
>
> ------------------------------
> *From:* Healeys <healeys-bounces at autox.team.net> on behalf of Leonard
> Berkowitz <DrBerkowitz at hotmail.com>
> *Sent:* Monday, November 30, 2020 2:39:37 PM
> *To:* healeys at autox.team.net <healeys at autox.team.net>
> *Subject:* [Healeys] Carb removal
>
> It has been thirty years since the last time I needed to do anything major
> on my BJ7 so my memory is not quite clear.  Can I remove the rear carb
> independently from the front carb? I have already designed a tool to access
> the lower hold down bolts.  If I remember correctly, I may have rebuilt and
> installed the carburetors when I rebuilt the engine, so access was not much
> of a problem.
>
> Thanks
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/eps2660@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20201130/8473cd5a/attachment.htm>