[Healeys] re-installing gear box--BJ8

[Michael Salter]

Just take a close look at the pilot bush in the end of the crankshaft.
I had a case where it was damaged and the 1st motion shaft had crumpled it
over.

M

On Fri., Nov. 20, 2020, 8:54 a.m. Tom Felts via Healeys, <
healeys at autox.team.net> wrote:

> I am having one heck of a time getting the gear box back in my BJ8.  Three
> people--me under the car-----had to remove the two mounting pieces from the
> rear--finally got it situated in the rear slot.  Seems the drive
> shaft--that I have lifted up as high as possible is still in the way.  we
> gave up on it after 2 hours of trying.  I've replaced 2 of these in the
> past but never had this problem.  Anyone have any comments/advice they want
> to share?
>
> TI
> tom
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20201120/f1f3f0c7/attachment.htm>