[Healeys] PCV Valve for 100s

[Bob Spidell]

Thanks Bill. Pictures would be much appreciated.

Do you recall the brand/part# of the valve?

Bob

On 11/19/2020 6:58 PM, WILLIAM B LAWRENCE wrote:
> I have done this. I had a piece of 1/4" pipe nipple (threaded end) 
> brazed on in the center of the carburetor balance pipe, made a flange 
> to fit the opening for the crankcase down tube on the tappet cover and 
> placed the PCV in the space between the exhaust manifold and the 
> block. Then I ran a copper tube to the balance pipe. It seems to work 
> fine, doesn't affect idle or performance, controls blowby and keeps 
> oil from entering the air cleaner. I will try to get some pics, but 
> it's pretty much hidden.
>
> Bill Lawrence
> BN1 #554
> ------------------------------------------------------------------------
> *From:* Healeys <healeys-bounces at autox.team.net> on behalf of Bob 
> Spidell <bspidell at comcast.net>
> *Sent:* Thursday, November 19, 2020 11:58 PM
> *To:* Healeys <healeys at autox.team.net>
> *Subject:* [Healeys] PCV Valve for 100s
> I have been greatly impressed with the PCV setup in my BJ8. I would like
> to rig one for my BN2 but, unfortunately, it isn't an 'obvious'
> situation like for the 6-cyl, 12-port cars (not a complete,
> recirculating system, but close enough). Has anyone fitted a PCV valve
> to a 4-cyl?
>
> TIA,
> Bob
> _______________________________________________

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20201119/3f5355a6/attachment.htm>