[Healeys] PCV Valve for 100s

[WILLIAM B LAWRENCE]

I have done this. I had a piece of 1/4" pipe nipple (threaded end) brazed on in the center of the carburetor balance pipe, made a flange to fit the opening for the crankcase down tube on the tappet cover and placed the PCV in the space between the exhaust manifold and the block. Then I ran a copper tube to the balance pipe. It seems to work fine, doesn't affect idle or performance, controls blowby and keeps oil from entering the air cleaner. I will try to get some pics, but it's pretty much hidden.

Bill Lawrence
BN1 #554
________________________________
From: Healeys <healeys-bounces at autox.team.net> on behalf of Bob Spidell <bspidell at comcast.net>
Sent: Thursday, November 19, 2020 11:58 PM
To: Healeys <healeys at autox.team.net>
Subject: [Healeys] PCV Valve for 100s

I have been greatly impressed with the PCV setup in my BJ8. I would like
to rig one for my BN2 but, unfortunately, it isn't an 'obvious'
situation like for the 6-cyl, 12-port cars (not a complete,
recirculating system, but close enough). Has anyone fitted a PCV valve
to a 4-cyl?

TIA,
Bob
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/ynotink@msn.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20201120/b3ff7870/attachment.htm>