[Healeys] BN1 rear springs

[S.Carr]

I should have explained that we used a variant of the procedure.  The springs were already bolted in place, so we ran the strap around the frame and under the jack, to hold the frame down while we jacked up the spring—then we could move the axle to get the peg aligned with the hole in the spring while we installed the U-bolts. 

Sarah C.

Sent from Mail for Windows 10

From: Michael MacLean
Sent: Monday, November 16, 2020 11:10 AM
To: britfan1 at epix.net; Healeys
Subject: RE: [Healeys] BN1 rear springs

I love it when a plan comes together!
Mike M
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20201116/0e0da31d/attachment.htm>