[Healeys] Flywheel removal

Bob Spidell bspidell at comcast.net
Thu Nov 12 08:02:52 MST 2020


If it's not (relatively) new, I recommend replacing the front seal on 
the gearbox--inside the bellhousing--while you have the gearbox out. Oh, 
and check your release 'bearing.'

Bob


On 11/12/2020 4:21 AM, Tom Felts via Healeys wrote:
> Thanks--I'm removing it to access the aftermarket oil seal that I 
> think is leaking.  I found a small puddle of oil on the floor in that 
> approximate area and could find no other source of the leak.
>
> Tom
>
> ----- Original Message -----
> From: warthodson--- via Healeys <healeys at autox.team.net>
> To: healeys at autox.team.net
> Sent: Wed, 11 Nov 2020 11:08:32 -0500 (EST)
> Subject: Re: [Healeys] Flywheel removal
>
>
> No, you are not, but it might be informative to know why you are 
> removing it!
> Gary
>
> -----Original Message-----
>
> From: Tom Felts via Healeys <healeys at autox.team.net>
>
> To: healeys <healeys at autox.team.net>
>
> Sent: Wed, Nov 11, 2020 10:01 am
>
> Subject: [Healeys] Flywheel removal
>
> If I remove and replace the flywheel in the exact location that it was 
> removed am I disturbing anything like timing or ??
>
> Thanks
> tom
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20201112/5d6e8de0/attachment.htm>


More information about the Healeys mailing list