[Healeys] Fasteners and Air Intake Stuff

john harper ah100tech at gmail.com
Fri Nov 6 09:15:05 MST 2020


Curtis

Yes this is. I should have remembered that the States and some other
countries are LHD.

Best regards

On Fri, 6 Nov 2020 at 12:33, Curtis Arndt <cnaarndt at gmail.com> wrote:

> Hi John,
>
> I'm not familiar with the "triangular aluminum adapter plate " on the
> BN1/2 master cylinder mounting.  Is this a RHD thing?
>
> Cheers,
>
> Curt
>
> On Fri, Nov 6, 2020 at 4:05 AM john harper <ah100tech at gmail.com> wrote:
>
>> Curtis
>>
>> As you say UNF but it might be worth adding that the triangular
>> aluminium adapter plate has a short countersunk bolt that is also UNF.
>>
>> Sometimes new owners when rebuilding are not aware of this plate and
>> cannot work out how to fit the master cylinder.
>>
>> Rgds
>>
>> On Fri, 6 Nov 2020 at 11:04, Curtis Arndt <cnaarndt at gmail.com> wrote:
>>
>>> Both of the master cylinder mounting bolts on most (most likely all)
>>> BN1s and definitely all BN2s were UNF.  You may have to run a 5/16 UNF tap
>>> into the holes to clean them out.
>>>
>>> On Thu, Nov 5, 2020 at 9:52 PM Michael MacLean via Healeys <
>>> healeys at autox.team.net> wrote:
>>>
>>>> Healey 100 listers,
>>>>      Can someone please confirm to me that the mounting bolts for the
>>>> master cylinder on a BN1/2 is BSF threads or UNF.  I started to thread in a
>>>> UNF bolt to mount the master cylinder and the familiar one turn and then
>>>> stop when I am using the wrong thread on this car appeared.  I firmly
>>>> believe if it's hard to do, you are doing it wrong.  Also, can someone
>>>> confirm the horizontal part of the split air director that mounts behind
>>>> the radiator grill is attached with two of the screws for the bumper
>>>> apron?  I see no other attachment points other than the top of the air
>>>> director vertical panel after it is bolted to the horizontal panel.  Where
>>>> is the top attachment point on the body for the vertical panel?  This would
>>>> be much easier if I had someone's BN1/2 to look at during assembly, but I
>>>> am on my own pretty much relying on pictures I can find on the internet.
>>>> Mike MacLean
>>>> _______________________________________________
>>>> Support Team.Net http://www.team.net/donate.html
>>>> Suggested annual donation  $12.75
>>>>
>>>> Archive: http://www.team.net/pipermail/healeys
>>>> http://autox.team.net/archive
>>>>
>>>> Healeys at autox.team.net
>>>> http://autox.team.net/mailman/listinfo/healeys
>>>>
>>>> Unsubscribe/Manage:
>>>> http://autox.team.net/mailman/options/healeys/cnaarndt@gmail.com
>>>>
>>>> _______________________________________________
>>> Support Team.Net http://www.team.net/donate.html
>>> Suggested annual donation  $12.75
>>>
>>> Archive: http://www.team.net/pipermail/healeys
>>> http://autox.team.net/archive
>>>
>>> Healeys at autox.team.net
>>> http://autox.team.net/mailman/listinfo/healeys
>>>
>>> Unsubscribe/Manage:
>>> http://autox.team.net/mailman/options/healeys/ah100tech@gmail.com
>>>
>>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20201106/b961bdfa/attachment.htm>


More information about the Healeys mailing list