[Healeys] 100 throttle linkage--assembly help needed

[Michael Salter]

I this any help Michael?

On Wed., May 27, 2020, 12:59 p.m. Michael Oritt, <michael.oritt at gmail.com>
wrote:

> In order to remove the intake and exhaust manifolds to access to repair
> the broken exhaust pipe for cylinders 1 and 4 I had to undo the throttle
> linkage.  Stupidly I did not diagram how everything was oriented prior to
> disassembly and I am having difficulty getting the linkage back together.  Specifically,
> I need to know how the bell crank mounts:
>
> 1.  Does its acute angle (less than 180 degrees) face up or down when the
> bellcrank is mounted on the post?
> 2.  Is the spacer/bushing that is attached to the bellcrank facing
> inboard (towards the block) or outboard when the unit is slipped over the
> post?
>
> Also, to what does the long throttle-return spring hook?
>
> TIA....Michael Oritt
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20200527/30350cfe/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20200527_132254.jpg
Type: image/jpeg
Size: 1954892 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20200527/30350cfe/attachment-0001.jpg>