[Healeys] Brake Line Benders
Bruce Steele
healeybruce at roadrunner.com
Fri May 22 14:56:40 MDT 2020
I have an articulating bender, similar to the second HF link, which I’ve used for fuel lines with good success.
Bruce Steele
Brea, CA
1960 BN7
From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Bob Spidell
Sent: Thursday, May 21, 2020 9:52 PM
To: Healeys <healeys at autox.team.net>
Subject: [Healeys] Brake Line Benders
What do y'all use? I have several, none of which are ideal; I have one of these:
https://www.harborfreight.com/tube-bending-pliers-95782.html
Which should work well, but has sharp edges which nick the line, which of course is not a good thing (I know, HARBOR FREIGHT 'quality'). I also have several of the articulating/anvil kind, which works OK but it's nigh impossible to get a really tight bend:
https://www.harborfreight.com/tubing-bender-3755.html
Anybody got one of these:
https://www.eastwood.com/eastwood-4n1-tubing-bender.html
The lines to the rear slave cylinders, in particular, have a small--1" or less--radius and I'd like to do them right.
Bob
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20200522/c6b4c61f/attachment.htm>
More information about the Healeys
mailing list