[Healeys] Wind blocker
banjojohn
banjojohn at cox.net
Mon May 18 18:13:57 MDT 2020
Hi allA while back there was a thread abour wind blockers, and I asked about where I could find a picture. I never found anything on the LBCars site, (likely user error)Anyway, I decided to try to build one for my BJ8, and I think it came out fairly well. I used the drain hole brackets down in the body just behind the doors as sockets to put the 5/16 steel rods into. I bent the rod to get the right angles to hold the bottom frame down against the tonneau support frame and added a couple straps with snaps that could snap to the snaps already on the tonneau to make sure it doesnt come loose. The bottom frame is made of 2 pieces of 3/4 × 1 oak with a piece of oak cove moulding attached to the bottom of the front one to fit over the tonneau frame rail. The "glass" is a piece of 1/8" lexan 9" x 38" sandwiched between the 2 oak pieces. I made mine 38 inches wide so it can be stowed on or under the parcel shelf whan not in use.Sent from my Sprint Samsung Galaxy S10e.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20200518/8c8a5631/attachment.htm>
More information about the Healeys
mailing list