<html><head><meta http-equiv="Content-Type" content="text/html; charset=UTF-8"></head><body dir="auto"><div dir="auto"><font face="sans-serif">Hi all</font></div><div dir="auto"><font face="sans-serif">A while back there was a thread abour wind blockers, and I asked about where I could find a picture. I never found anything on the LBCars site, (likely user error)</font></div><div dir="auto"><font face="sans-serif">Anyway, I decided to try to build one for my BJ8, and I think it came out fairly well. I used the drain hole brackets down in the body just behind the doors as sockets to put the 5/16 steel rods into. I bent the rod to get the right angles to hold the bottom frame down against the tonneau support frame and added a couple straps with snaps that could snap to the snaps already on the tonneau to make sure it doesnt come loose. The bottom frame is made of 2 pieces of 3/4 × 1 oak with a piece of oak cove moulding attached to the bottom of the front one to fit over the tonneau frame rail. The "glass" is a piece of 1/8" lexan 9" x 38" sandwiched between the 2 oak pieces. I made mine 38 inches wide so it can be stowed on or under the parcel shelf whan not in use.</font></div><div dir="auto"><br></div><div dir="auto"><br></div><div dir="auto"><br></div><div id="composer_signature" dir="auto"><div style="font-size:85%;color:#575757" dir="auto">Sent from my Sprint Samsung Galaxy S10e.</div></div><div dir="auto"><br></div></body></html>