[Healeys] Surgery to front braces

Skip Saunders tfsbj7 at gmail.com
Sun Jan 19 08:05:34 MST 2020


Don't do solution number 2 if you want to be able to turn a corner.  (Check
clearances with steering tie rods ... Not much wiggle room IMHO).


On Sun, Jan 19, 2020, 10:00 <simon.lachlan at alexarevel.plus.com> wrote:

> Thank you for all the replies.
>
> Advice is:-
>
> Don’t hack the braces around.
>
>    1. Mount fan on braces themselves. Lose a little efficiency but at
>    least get fan into the car.
>    2. Or, feasibly, cut the braces’ welds at the bottom, shove them about
>    3” back towards grille, trim them to length and reweld them. That would,
>    almost certainly, yield the necessary space.
>
>
>
> Probably going for option 1). Note the “almost” in 2) above. Also, doubt
> that the braces would bend easily as in “shove) above. And I don’t weld.
> Garage is immediately adjacent to kitchen, below a bedroom and bathroom and
> the whole house is thatched. I can just imagine the conversation with the
> insurance man as we stand in the ashes.
>
>
>
> Simon
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/tfsbj7@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20200119/25914808/attachment.htm>


More information about the Healeys mailing list