[Healeys] Tie Rod End Slotted Nuts

Perry Small healeyguy at aol.com
Fri Jan 3 17:24:33 MST 2020


Charlie
Just pulled an early BN 1 4 bolt hub front assembly from the bin. The side rod was still on it. The threads on the rod ends are 7/16-20 TPI.  11/16 inch across the flats. Here is the rub. Even though it looks like an early side rod, Is mounted to an early hub assembly, it is possible it has been replaced previously. 
Best I have at this point
P
Sent from my iPhone

> On Jan 3, 2020, at 4:09 PM, Charles Schott <schottc at knology.net> wrote:
> 
> 
> I need three slotted nuts for the original tie rod ends on a BN1. They appear to be metric 11M X 1.5 but I cannot find them. Does anyone have them or know where I can get them? Thanks.
> 
> Regards,
> 
> Charlie
> 
> 
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> 
> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
> 
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/schottc@knology.net
> 
> 
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> 
> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
> 
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/healeyguy@aol.com
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20200103/38001131/attachment-0001.htm>


More information about the Healeys mailing list