[Healeys] A-arm frame mounts specs

[Harold Manifold]

Hello,
 
Based on the way the chassis alignment drawings are dimensioned the A arm is
90 Degrees. The attached drawings should be good though BJ7.
 
Regards,
 
Harold
 
 

  _____  

From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of S and T
Miller
Sent: Monday, February 17, 2020 6:30 PM
To: healeys at autox.team.net
Subject: [Healeys] A-arm frame mounts specs


Anyone know the factory a-arm frame mount specs in degrees? One would assume
90 degrees when using a digital angle finder on the back side, but?

The Millers

"Always drive them, but remember each drive in an antique car is a test
drive."

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20200217/3da5bb28/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Chassis Alignment 1.jpg
Type: image/jpeg
Size: 1196598 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20200217/3da5bb28/attachment-0003.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Chassis Alignment 2.jpg
Type: image/jpeg
Size: 1313515 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20200217/3da5bb28/attachment-0004.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Chassis Alignment 3.jpg
Type: image/jpeg
Size: 1248063 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20200217/3da5bb28/attachment-0005.jpg>