[Healeys] A-arm frame mounts specs

[Michael Salter]

Pretty sure that the inner faces of the front "A" arm mounts are, as you
suggest, vertical.
I always check them visually when evaluating a Healey or searching for an
alignment issue.
As to the horizontal inclination of the pivot bolts I believe it is 2.5
degrees but cannot find my original frame drawing which shows it.
Probably someone else on the list has the drawing.

M

On Tue, Feb 18, 2020 at 3:32 PM S and T Miller <stmiller96 at hotmail.com>
wrote:

> Anyone know the factory a-arm frame mount specs in degrees? One would
> assume 90 degrees when using a digital angle finder on the back side, but?
>
> The Millers
>
> "Always drive them, but remember each drive in an antique car is a test
> drive."
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20200218/e020fe7a/attachment.htm>