[Healeys] Fasteners Again

[Michael Salter]

Actually I'm pretty sure that that is a 5/16" Whitworth thread. .. not
B.S.F.
The same thread continued right throug production long after everything
else saw changed to U.N.F.

M

On Sun., Dec. 27, 2020, 3:37 a.m. Alan Seigrist, <healey.nut at gmail.com>
wrote:

> To clarify, originally there was a set screw (i.e., a fully threaded hex
> bolt) there to be the final tighten for the bracket.....
>
> On Sun, Dec 27, 2020 at 4:25 PM Alan Seigrist <healey.nut at gmail.com>
> wrote:
>
>> Hi Michael -
>>
>> If threaded, that hole should be either 5/16ths BSF or 3/8ths BSF.  I
>> will have to check.
>>
>> Best Regards,
>>
>> Alan
>>
>> On Sun, Dec 27, 2020 at 8:27 AM Michael MacLean <rrengineer.mike at att.net>
>> wrote:
>>
>>> Can someone tell me the fastener arrangement for this hole in the
>>> generator front plate of my BN2?  From some pictures I see on the web there
>>> is a nut on the backside of the generator plate.  Why then is the hole
>>> threaded? (and it's not UNF)  What thread/size fastener and/or nut do I
>>> need?
>>> Mike MacLean
>>> _______________________________________________
>>> Support Team.Net http://www.team.net/donate.html
>>> Suggested annual donation  $12.75
>>>
>>> Archive: http://www.team.net/pipermail/healeys
>>> http://autox.team.net/archive
>>>
>>> Healeys at autox.team.net
>>> http://autox.team.net/mailman/listinfo/healeys
>>>
>>> Unsubscribe/Manage:
>>> http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com
>>>
>>> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20201227/ac488dee/attachment.htm>