[Healeys] Engine Blanking Plate

[Michael Salter]

Yes Harold, The earlier 6 cylinder engines used this blanking plate to
cover the fuel pump hole.
[image: image.png]
M


On Sun, Dec 13, 2020 at 12:46 PM Harold Manifold <manifold at telus.net> wrote:

> Full disclosure the attached picture is not my engine but mine should look
> similar some day. On the side of the block there is a mounting point for a
> fuel pump just to the left of the SP casting mark. It looks like versions
> of this engine block used in other cars had a cam driven fuel pump. I am
> interested to know the size of the hole in the block for the cam driven
> pump and if BMC ever supplied a blanking plate to cover the hole. Part
> number appreciated if it exists.
>
>
> Thanks in advance.... Harold
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20201213/02f9e408/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Engine Blanking Plate.jpg
Type: image/jpeg
Size: 428363 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20201213/02f9e408/attachment.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 248380 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20201213/02f9e408/attachment.png>