[Healeys] Steering Mount and Fender Screws

[Roland Wilhelmy]

#6 screws for the hundreds. I think later models might use #4s. If you have
some wallered out holes that won't hold a #6 but will hold an 8 you can use
#6 Johnson screws that have #8 threads with #6 heads. If you are drilling
new holes try to get some hardened #6 screws, maybe hex head, to help you
cut the new threads. A bit of grease or petroleum jelly helps too.


-Roland


> On Fri, Dec 11, 2020 at 10:28 PM Michael MacLean <rrengineer.mike at att.net>
> wrote:
>
>> Can someone tell me what screws are used to fasten the fenders to the "A"
>> pillar of my BN2? (see picture)  Also, How do I know which of the four
>> holes the steering column bolts to?  (see other picture)
>> Mike MacLean
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>> Suggested annual donation  $12.75
>>
>>
>>
>> _______________________________________________
> Support Team.
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20201212/de5df8ee/attachment.htm>