[Healeys] Wadding or Batting for Door Panels

[richard mayor]

I purchased felt at a fabric store. The thickness was about 1/16th inch.  I
don't plan on getting it wet so I'm not worried about it retaining
moisture.

On Thu, Aug 20, 2020 at 7:19 PM Harold Manifold via Healeys <
healeys at autox.team.net> wrote:

> Hello,
>
> Any suggestions on a good material to use as wadding or batting for
> the door panels? Looking at what I removed from my 60 year old door panels
> it should be approximately 1/16" - 1/8" thick and not retain moisture. I
> found a picture on the internet but there was no information on what the
> material was.
>
>
> Thanks in advance ... Harold
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/boyracer466@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20200821/ff5e4071/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Wadding for Door Panel.JPG
Type: image/jpeg
Size: 68217 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20200821/ff5e4071/attachment.jpe>