[Healeys] 100M Head

[Kees Oudesluijs]

That is a massive repair.

Wrong washer though. Should be hardened steel, machined.

Kees Oudesluijs



Op 30-4-2020 om 07:32 schreef Michael MacLean:
>
>
>
>
> When I bought this head from my restorer friend that has passed, he 
> told me it was off a 100M.  A valve stem had bent on startup and the 
> valve, valve guide and the hole for the valve guide were damaged.  
> When I was putting seals on the valves I noticed one of the valve 
> guides was larger in diameter than the rest.  This was the repaired 
> valve and guide.  Luckily it is an exhaust valve so a seal of the type 
> i am using did not need to be fit over it.  My question is, a lot of 
> the body parts were stamped with the chassis number on a 100M.  Did 
> they also number engine parts?  This head had been cracked in the past 
> and repaired correctly.  See the " X" welded into the top of the head 
> in the picture.
> Mike MacLean
>
> Sent from AT&T Yahoo Mail on Android 
> <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/coudesluijs@chello.nl
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20200430/dc797268/attachment.htm>