[Healeys] fuel gage sending unit

[Kees Oudesluijs]

As the old one was working OK re-fit it.

As always: If it ain't broke don't fix it!

Kees Oudesluijs



Op 28-9-2019 om 18:30 schreef Ron Fine:
> Due to a leak around the fuel sending unit I needed to remove the unit 
> and decided to replace it with a new one from Moss Motors.  The one I 
> was removing was at least 12 years old but it did keep fairly accurate 
> track of the fuel level.
> The new one seemed to work OK for a few hundred miles, but now it does 
> not move off the full mark until the tank is more than 50% empty.  I 
> have carefully checked all the wires and grounding connections and 
> everything looks clean and tight.  The gage swings from empty to full 
> when powered up so I doubt the gage is the problem.
> Any suggestions on what to look for now?  I have not removed the unit yet.
> Are there any “better quality” sending units available on the market?
> Thanks,
> Ron Fine
> 61 BN7
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/coudesluijs@chello.nl
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20190928/bd546037/attachment.html>