[Healeys] POR15 in frame?

[Michael MacLean]

 I used this on my BN2 frame during the bodywork phase.
Eastwood Internal Frame Anti-Rust Coating, 14 oz. Spray

| 
| 
| 
|  |  |

 |

 |
| 
|  | 
Eastwood Internal Frame Anti-Rust Coating, 14 oz. Spray

Take out rust that's hiding away in the innards of your project car with this black aerosol coating for auto fra...
 |

 |

 |



Mike MacLean
    On Monday, October 28, 2019, 10:15:09 AM PDT, Bob Spidell <bspidell at comcast.net> wrote:  
 
  Can't hurt.  I shot LPS3 into my BJ8's frame with an undercoating gun; linseed oil--often used in tubular aircraft fuselages--and other rust preventives would be fine, too.
 
 When we had our BN2/100M frame on a rotisserie, you could hear the rust flakes/powder when you rotated the rotisserie.  Not much you can do about it short of cutting the frame open (or replacing with one of the new frames).
 
 Bob
 
 On 10/28/2019 10:01 AM, S. Carr wrote:
  
 
  The man working on my 100 (frame & welded-on body parts all blasted & primed) is wondering if it would be a good idea to pour some POR15 into the holes in the frame and move the car around (it’s on a rotisserie) to spread the stuff around inside the frame rails.  What’s the List’s opinion?   Thanks, Sarah Carr BN1 in PA   
 
 _______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/rrengineer.mike@att.net

  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20191028/9e938fcf/attachment.htm>