[Healeys] Door card material

[warthodson at aol.com]

What ever you use, consider that at some point in time they may get wet. For example, you might get caught in a heavy rain storm before you can find a spot to erect the top & install the side curtains (if your car has them). The material might buckle, warp or delaminate if it is not water resistant.Gary Hodson 


-----Original Message-----
From: richard mayor <boyracer466 at gmail.com>
To: healeys <healeys at autox.team.net>
Sent: Fri, Oct 18, 2019 1:53 pm
Subject: [Healeys] Door card material

I'm getting ready to make new door cards and trim my doors. My research has found that people use everything including ABS plastic, foam board, masonite and plywood. I'm leaning towards Baltic Birch plywood at this point but I would like the infinite wisdom of this list before I go down that, or any other, road.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/warthodson@aol.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20191019/d7ecc3ed/attachment.htm>