[Healeys] Bulb holder issue
coudesluijs at chello.nl
Tue Nov 26 15:11:36 MST 2019
Halogen in a tail light? Recipe for trouble as they get way to hot. Use
a Tungsten light or an LED. As suggested, break the glass and remove the
bulb base with pliers.
Op 26-11-2019 om 22:55 schreef Michael Oritt:
> I have been struggling with the removal/replacement of the halogen
> taillight bulbs on my car. I simply cannot get q good enough grip on
> the bulb to push/turn and remove it from the bayonet socket. Unlike
> later cars the glass lens on the 100 is almost flat, the bulb is
> straight with no shoulder and does not project very far beyond the
> surface of the receptacle.
> I'm sure there is a trick here--can anyone share it with me?
> Best--Michael Oritt
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
> Healeys at autox.team.net
> Unsubscribe/Manage: http://email@example.com
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Healeys