[Healeys] Kneebone connected to the ....

[David Nock]

 As ground on the fuel gauge or the dash warning light 

David Nock

Sent from my iPhone

> On Nov 23, 2019, at 1:48 AM, Patrick & Caroline Quinn <p_cquinn at tpg.com.au> wrote:
> 
> 
> Hello
>  
> Currently there is a BN2 sharing garage space in my barn with the BN3 and the Healey Duncan.
>  
> Normally I can work through problems with the relatively simple auto electrical systems fitted to our Healeys and Austin-Healeys, but this one has me stumped.
>  
> The indicators of the BN2 refuse to work so I have been head down, tail up trying to work it out. The RHD car is negative earth and apart from a modern plastic cased flasher can it’s quite standard.
>  
> Now this is curious. Turn on ignition and everything is fine with the fuel gauge reading half full. Switch on the left indicator which doesn’t work, but the fuel gauge needle drops to empty. Turn off indicator and after a second the fuel gauge needle goes back to half. Turn on right indicator and the same happens. I’m concerned that the smoke is going to escape!
>  
> No amount of looking at the wiring diagram gives me a clue
>  
> Any suggestions?
>  
> Hoo Roo
>  
> Patrick
> Blue Mountains, Australia
>  
>  
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> 
> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
> 
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/healeydoc@sbcglobal.net
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20191123/69cab0f6/attachment-0001.htm>