[Healeys] Getting engine mounts in line.

Michael Salter michaelsalter at gmail.com
Fri May 31 06:26:33 MDT 2019


Do keep in mind that the mounts are "handed" perhaps someone put them on
the wrong side(s).
Just a thought.

On Fri, May 31, 2019, 4:48 AM , <simon.lachlan at alexarevel.plus.com> wrote:

> Hi,
>
> I’ve been messing around with the front end of my 3000 so I’ve had to
> detach the engine mounts by removing the vertical bolts. Now that I’m
> trying to get the mounts reattached, I’m having a hell of a job to get the
> holes to line up. I’ve loosened off the bolts that attach the mounts to the
> engine, but there’s still about half an inch here, there and everywhere to
> contend with.
>
> Is there a knack to this job? I can see myself expending a lot of brute
> force and ignorance here….
>
> Simon
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20190531/5c2f7c1f/attachment.html>


More information about the Healeys mailing list