[Healeys] Corrosion on Clutch Master
050.rpl at gmail.com
Thu May 2 18:03:04 MDT 2019
Thanks Michael. It is on the outside. I’ll clean it off and tighten the joints.
Email: 050.rpl at gmail.com
Sent from my iPhone
> On May 2, 2019, at 7:39 PM, Michael Salter <michael.salter at gmail.com> wrote:
> Hi Price you don't mention whether the corrosion is in the bore or on the outside.
> Corrosion on the outside is usually as indication that there is a small leak of brake fluid. On aluminum cylinders it produces a crusty white deposit which is usually easily cleaned off. The leak will be under the corrosion.
> Corrosion in the bore is not so good but can often be corrected by rebuilding the cylinder.
> NEVER hone aluminum cylinder bores ... the cylinder will be irreparably damaged.
>> On Thu, May 2, 2019, 6:18 PM R. Lindsay, <050.rpl at gmail.com> wrote:
>> I have a small buildup of corrosion on the surface of my clutch master. Any ideas on what could be causing this?
>> Thank you so much for the help.
>> Price Lindsay
>> Sent from my iPad
>> Support Team.Net http://www.team.net/donate.html
>> Suggested annual donation $12.75
>> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
>> Healeys at autox.team.net
>> Unsubscribe/Manage: http://email@example.com
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Healeys