[Healeys] BN6 Tonneau Cover Fasteners

[Jean Caron]

Neil,
I do not quite understand what you are asking here but I have a BN6 and the tonneau cover is held at the front by a turnbuckle on the driver side and the passenger side> Each turnbuckle is secured to the dashtop by two screws and there is also a “Tenax “ fastener that holds the passenger side of the tonneau cover immediately next to the zipper very close to the rearview mirror. Nothing else holds the tonneau cover at the front. There are no rivets anywhere at the front.

Jean

Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10

________________________________
From: Healeys <healeys-bounces at autox.team.net> on behalf of Neil McDonald <nmcd10 at gmail.com>
Sent: Tuesday, June 18, 2019 2:39:25 PM
To: Healey List
Subject: [Healeys] BN6 Tonneau Cover Fasteners

I need to install several turn buttons to hold the front end of my new tonneau cover to the trim over the inner panel scuttle top. I believe the visible vinyl covers a hardboard or similar semi rigid backing. Am I right in thinking that I need to use blind rivets to go all the way through this trim piece to attach the turn button to the steel inner panel scuttle top? Or should this be a screw attachment to the steel? Comments please.
--
____________________
Neil & Pam McDonald

Email: nmcd10 at gmail.com<mailto:nmcd10 at gmail.com>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20190618/c8d2183b/attachment.html>