[Healeys] Trim bits
Bob Spidell
bspidell at comcast.net
Sun Jul 28 09:18:54 MDT 2019
Jean,
Do you know of any vendor that makes the correct leather straps?
Bob
On 7/28/2019 6:57 AM, Jean Caron wrote:
>
> The hold down straps should be made of leather, with a single or two
> piece glued together but in many of the kits available today, like in
> the photo here, they are made of the same type of vinyl as the trim,
> double thickness, sewn together.
>
> Jean
>
> Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for
> Windows 10
>
> ------------------------------------------------------------------------
> *From:* Healeys <healeys-bounces at autox.team.net> on behalf of Bob
> Spidell <bspidell at comcast.net>
> *Sent:* Saturday, July 27, 2019 7:44:54 PM
> *To:* healeys at autox.team.net <healeys at autox.team.net>
> *Subject:* Re: [Healeys] Trim bits
>
> Photos. The rivets are two-piece; I used the same on the spare tire boot.
>
>
> Bob
>
> On 7/26/2019 8:59 PM, Bob Spidell wrote:
>>
>> Bill,
>>
>>
>> I meant to snap a photo of my BN2's cover today, but got carried away
>> scraping tarpaper off my BJ8's floor pans ;)
>>
>>
>> Anyway, the bottom is secured with 'Lift-A-Dot' snaps; items# 102-104
>> on the latest Moss catalog on p. 138 (part# 226-308 for the snap).
>> The male part of the L-A-Ds are bolted to the rear bulkhead. The
>> straps, IIRC, are secured to the cover with rivets, but I'll confirm
>> tomorrow (unless I have another senior moment).
>>
>>
>> Bob
>>
>>
>> On 7/25/2019 9:22 PM, WILLIAM B LAWRENCE wrote:
>>> Can anyone tell me what type of hardware is used to attach the two
>>> leather hold-down straps to the battery cover on a 100?
>>>
>>> Thanks.
>>>
>>> Bill Lawrence
>>> BN1 #554
>>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20190728/4aca6426/attachment.html>
More information about the Healeys
mailing list