[Healeys] Trim bits

[Jean Caron]

The hold down straps should be made of leather, with a single or two piece glued together but in many of the kits available today, like in the photo here, they are made of the same type of vinyl as the trim, double thickness, sewn together.

Jean

Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10

________________________________
From: Healeys <healeys-bounces at autox.team.net> on behalf of Bob Spidell <bspidell at comcast.net>
Sent: Saturday, July 27, 2019 7:44:54 PM
To: healeys at autox.team.net <healeys at autox.team.net>
Subject: Re: [Healeys] Trim bits


Photos.  The rivets are two-piece; I used the same on the spare tire boot.


Bob

On 7/26/2019 8:59 PM, Bob Spidell wrote:

Bill,


I meant to snap a photo of my BN2's cover today, but got carried away scraping tarpaper off my BJ8's floor pans ;)


Anyway, the bottom is secured with 'Lift-A-Dot' snaps; items# 102-104 on the latest Moss catalog on p. 138 (part# 226-308 for the snap).  The male part of the L-A-Ds are bolted to the rear bulkhead.  The straps, IIRC, are secured to the cover with rivets, but I'll confirm tomorrow (unless I have another senior moment).


Bob


On 7/25/2019 9:22 PM, WILLIAM B LAWRENCE wrote:
Can anyone tell me what type of hardware is used to attach the two leather hold-down straps to the battery cover on a 100?

Thanks.

Bill Lawrence
BN1 #554


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20190728/bed02412/attachment.html>