[Healeys] B Pillar Bolt Pattern

[Michael Salter]

I would recommend waiting until you have the doors hung and adjusted before
making the holes for the strikers.
They aren't hard to lay out and drill at that stage but if you get them
wrong now they are somewhat difficult to move.

M

On Sat, Jul 27, 2019, 9:33 AM Charles Schott, <schottc at knology.net> wrote:

> Does anyone know where I can get information on welding in new B pillars
> on a 100 BN1. The old ones are in very bad shape and the B pillars I
> purchased had no holes in them so I would like to have a pattern. Thanks.
>
> Regards,
>
> Charlie Schott
>
> ------------------------------
>
>
>
>
>
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/schottc@knology.net
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20190727/ff1c45f1/attachment.html>