[Healeys] Trim bits

[Jean Caron]

Bill,
Bob is correct in how he described how the leather straps are held and can confirm that the straps are held by two rivets to the cover. These rivets are of the two- piece type, black in colour. I can send you photos if you wish.

Jean

Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10

________________________________
From: Healeys <healeys-bounces at autox.team.net> on behalf of Bob Spidell <bspidell at comcast.net>
Sent: Friday, July 26, 2019 10:59:58 PM
To: WILLIAM B LAWRENCE <YNOTINK at msn.com>
Cc: Healeys <healeys at autox.team.net>
Subject: Re: [Healeys] Trim bits


Bill,


I meant to snap a photo of my BN2's cover today, but got carried away scraping tarpaper off my BJ8's floor pans ;)


Anyway, the bottom is secured with 'Lift-A-Dot' snaps; items# 102-104 on the latest Moss catalog on p. 138 (part# 226-308 for the snap).  The male part of the L-A-Ds are bolted to the rear bulkhead.  The straps, IIRC, are secured to the cover with rivets, but I'll confirm tomorrow (unless I have another senior moment).


Bob


On 7/25/2019 9:22 PM, WILLIAM B LAWRENCE wrote:
Can anyone tell me what type of hardware is used to attach the two leather hold-down straps to the battery cover on a 100?

Thanks.

Bill Lawrence
BN1 #554

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20190727/fda3d9c6/attachment.html>