[Healeys] Rear Spring Bushes

[Harold Manifold]

Maybe I should join the Rant. The bushings I have are 4-5 thou larger than
the tube. I agree with your 1-2 thou interference fit.

  _____  

From: Michael Salter [mailto:michaelsalter at gmail.com] 
Sent: Sunday, July 14, 2019 5:05 AM
To: Harold Manifold
Cc: healeys at autox.team.net
Subject: Re: [Healeys] Rear Spring Bushes


The bushes should be made of iron and be only 1 or 2 thou larger than the ID
of the tube.  
Easily installed using a piece of 1/2" threaded rod and a couple of nuts.
More reproduction parts problems maybe?
M

On Sat, Jul 13, 2019, 10:55 PM Harold Manifold, <manifold at telus.net> wrote:



Hello,
 
Any suggestions or tips on installing new rear spring bushes? The new bushes
seem to be much larger that the hole in the chassis bracket. Picture of
bushes attached.
 
Thanks,
 
Harold
 
 
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20190714/711c3bb3/attachment.html>