[Healeys] Rear Spring Bushes

Michael Salter michaelsalter at gmail.com
Sun Jul 14 06:04:41 MDT 2019


The bushes should be made of iron and be only 1 or 2 thou larger than the
ID of the tube.
Easily installed using a piece of 1/2" threaded rod and a couple of nuts.
More reproduction parts problems maybe?
M

On Sat, Jul 13, 2019, 10:55 PM Harold Manifold, <manifold at telus.net> wrote:

> Hello,
>
> Any suggestions or tips on installing new rear spring bushes? The new
> bushes seem to be much larger that the hole in the chassis bracket. Picture
> of bushes attached.
>
> Thanks,
>
> Harold
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20190714/3da9d014/attachment.html>


More information about the Healeys mailing list