[Healeys] SU carbs' vent holes.

[simon.lachlan at alexarevel.plus.com]

Thank you all for your advice re vent holes. It transpires that my caps were
probably drilled at the factory, sealed, drilled again and sealed again. Ie
now sporting two sealed holes. The carbs do have the internal drilling so
the (sealed) caps are correct. I knew about the internal vent holes, but
only vaguely. Plainly, I was unaware that they are actually visible from
above once the caps have been removed!

Simon

 

From: Mark Donaldson <ardmorebusiness at xtra.co.nz> 
Sent: 29 January 2019 04:26
To: simon.lachlan at alexarevel.plus.com; 'Healeys' <healeys at autox.team.net>
Subject: RE: [Healeys] SU carbs' vent holes.

 

Simon,

 

Here's what you need to know.

 

Mark

Ardmore, NZ

 



 

  _____  

From: simon.lachlan at alexarevel.plus.com
<mailto:simon.lachlan at alexarevel.plus.com>
[mailto:simon.lachlan at alexarevel.plus.com] 
Sent: Monday, 28 January 2019 12:50 p.m.
To: Healeys
Subject: [Healeys] SU carbs' vent holes.

 

How can one tell if  an HD6 should have a vented cap ie a little hole in the
black plastic cap?

Mine have two holes in the caps, both filled. I suspect they should be
vented...

Any ideas?

Thanks, 

Simon

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20190129/2fedf2d6/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 98584 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20190129/2fedf2d6/attachment.jpg>