[Healeys] dynamo part

[Michael Oritt]

Prior to my decision to stop dicking around with the generator and
replacing with an HD alternator I had my local generator/starter shop
rebuild it putting a bearing on place of the standard bushing

Best--Michael Oritt

On Tue, Jan 22, 2019, 9:07 AM Ed Orr <eorr at cogeco.ca wrote:

> Gary you might try Michael Hildrey at British Vehicle Electric , Beaton
> Ontario , Canada 905-729-4276 , bve at bellnet.ca . The email address is
> from a very old business card but the phone number should be current .
> His prices are very reasonable , have bought several rebuilt starters and
> generators from him .
> Ed Orr
>
> *From:* warthodson at aol.com
> *Sent:* Monday, January 21, 2019 9:03 AM
> *To:* healeybruce at roadrunner.com ; healeys at autox.team.net
> *Subject:* Re: [Healeys] dynamo part
>
> Bruce,
> Thanks for the response. I recently sent my generator to Mike at Star
> Elec. & it arrived back rebuilt a few days ago. It looks great! He is very
> good to work with. He did not have a replacement insulator, but he directed
> me to Abingdon Spares. That is where I received a replacement insulator,
> but it is the one in the scan that is too small to fit the center to center
> spacing on my posts. They do not have any other insulators & no sources.
> So to anyone listening, I still would like to find a source for the
> correct insulator.
> Gary Hodson
>
> -----Original Message-----
> From: Bruce Steele <healeybruce at roadrunner.com>
> To: warthodson <warthodson at aol.com>
> Sent: Sun, Jan 20, 2019 11:11 pm
> Subject: RE: [Healeys] dynamo part
>
> Try contacting Mike Martinez at Star Electric in Monrovia, CA,
> tel:+1-866-969-7827.
>
> Bruce Steele
> Brea, CA
> 1960 BN7
>
> *From:* Healeys [mailto:healeys-bounces at autox.team.net] *On Behalf Of *
> warthodson at aol.com
> *Sent:* Saturday, January 19, 2019 3:24 PM
> *To:* healeys at autox.team.net
> *Subject:* [Healeys] dynamo part
>
> I have a Lucas dynamo/generator # C45PV5, 22456B. It came with my '53 BN1.
> I am not sure if it is correct for this application, but I have decided to
> use it & am having it rebuild.
> There are two electrical terminals on the end of this Dyno. They have an
> single insulator that fits snugly around both terminals. See attached scan
> of the insulator. Unfortunately, the original insulator is broken & the
> missing piece is lost. I was able to locate a replacement insulator, but
> the spacing between the two terminal holes does not match my Dyno.-see
> attached.
> The center to center spacing between the two holes needs to be 1-5/16" to
> fit my Dyno. Does anyone have a spare insulator or can suggest a source,
> perhaps a rebuilder in the UK, that might be able to help me?
> Thanks,
> Gary Hodson
>
> ------------------------------
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/eorr@cogeco.ca
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michael.oritt@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20190122/be96ed9a/attachment.html>