[Healeys] Rear engine mountings

[Per Schoerner]

Simon
They are easy to replace, but I think you have to remove the tie rod to do it.

Per

Skickat från min iPhone

> 21 jan. 2019 kl. 10:57 skrev <simon.lachlan at alexarevel.plus.com> <simon.lachlan at alexarevel.plus.com>:
> 
> Hi,
> See attached.
> I’ve replaced the big engine mountings in the engine bay. Horrible job.
> I’ll replace all the tie-rod rubber before replacing it. Easy enough.
> But I’ve not got round to the other bits, parts 24 & 27. Easy to access at first glance. Is there any hidden snag? If I undo those nuts, will I  ever line it all up again?
> I can see that the engine and gearbox might want to sag down a couple of inches onto the cross bar, no great problem. But will the whole thing have some inherent tendency to get out of line and stay out of line? ie, are there any hidden snags? Any necessary precautions?
> Thanks
> Simon
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20190121/c1d4cb8d/attachment.html>