[Healeys] Shock Tower

[Tom Felts]

How did you get to the nut to weld it?  Isn't it captive under the mount?

----- Original Message -----
From: Bob Haskell <rchaskell at earthlink.net>
To: gablegerry at netscape.net, healeys at autox.team.net
Sent: Sun, 17 Feb 2019 11:30:20 -0500 (EST)
Subject: Re: [Healeys] Shock Tower

Gerry,

I had one of the outside nuts break loose.  I was able to screw a bolt 
into the nut, pull the nut up against the plate and TIG weld it into place.

Cheers,

Bob Haskell
Austin Healey 3000 MkI registrar
http://www.ciahc.org/registry_3000mk1.php

On 2/16/19 11:58 PM, gablegerry at netscape.net wrote:
> 
> 
>     I removed the shock to replace the rubber rebound. One came off
>     nicely and went back nicely.  The other not so good.  The back bolts
>     were loose.  When I took the shock off I discovered the nuts that
>     received the bolts had release from the tower and were not
>     connecting to the bolts.  Any suggestion on how to fix are greatly
>     appreciated!!!!
>     Thank Gerry
> 
> 
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> 
> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
> 
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/rchaskell@earthlink.net
> 
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/tomfelts@windstream.net