[Healeys] BJ8 Choke cable, coolant temperature sensor

[Frank Magnusson]

Hi Tom,

IIRC, I used a flare nut wrench to get the temp sensor nut off at the block.
You'll round it off with a Crescent wrench most likely and then have bigger
problems.  It's been a long time since I replaced mine, but IIRC a ready
made flare nut wrench worked fine. 

Frank


< I need to extract the temperature sensing bulb from the
block, and I need to split the choke cable at the block.

Is a cresent wrench sufficient to remove the temperature sensing bulb from
the block, or do I need a special tool to remove it?

- Tom>


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus